지구온난화 및 기후변화 대응기술로써 세계 각국은 CCS(이산화탄소 포집 및 저장)에 주목하고 있으며 관련 기술개발을 위해 노력하고 있다. CCS는 크게 포집, 수송, 저장 공정으로 이루어져 있으며, 이중 포집공정에서는 이산화탄소 외에다양한 불순물이 불가피하게 유입될 수 있다. 본 연구에서는 SO2 및 NO2 가스와 수분이 포함된 CO2 스트림이 CO2 수송관부식에 미치는 영향을 조사하기 위해 실험을 수행하였다. 시편은 인산염 코팅된 철관이며 내부에 SO2, NO2, H2O 불순물이혼합된 CO2 스트림을 채우고 이를 100바, 29℃의 환경 하에서 부식특성 변화를 관찰하였다. 시편의 부식특성 변화를 관찰하기 위해 SEM촬영 및 EDS 측정 등을 진행하였다. 실험결과 SO2나 NO2가 주입된 모든 시편에서 한계용해도를 초과하지 않는수분농도 조건 하에서도 부식이 발생하였으므로 불순물 농도를 엄격히 관리할 필요가 있는 것으로 나타났다. 다만 SO2 및NO2와 같은 불순물이 존재하지 않는 상황에서는 한계용해도를 고려한 수분제어만으로 부식관리가 가능할 것으로 판단된다.본 연구결과에 근거하여 고압 CO2 스트림 내 SO2 및 NO2의 농도는 각각 175ppm 및 65ppm 미만으로 유지할 것을 제안하는바이다.
To mitigate global warming and climate change, many countries are investing massively on the developmentof CCS technology, which is assumed to be the key technology to reduce CO2 emissions. CCS technology iscomprised of the capture, transport, and storage processes. During the capture process, impurities other than CO2 areinevitably flowed into the CO2 stream. In the present study, corrosion characteristics of a phosphate coated tube forCO2 transportation was investigated with a CO2 stream composed of CO2, H2O, SO2, and NO2. The test specimen wasa phosphate coated steel tube, which was filled with CO2 stream with the impurities mentioned above. SEM-EDSanalysis is conducted to investigate the corrosion behavior. The results showed that although the H2O concentrationdid not exceed the solubility limit, corrosion occurred in the specimen, which has an inflow of SO2 or NO2. Thissuggests that the SO2, NO2 and H2O concentration should be strictly controlled. These results suggest that the SO2and NO2 concentration should be controlled below 175ppm and 65ppm, respectively. (이하 생략)
TZ-SLE-1476982
SO2 및 NO2 포함고압 CO2 스트림이인산염코팅 CO2 수송관 부식
씽크존에서는 아래와 같은 조건에 해당하는 자료의 경우에 환불 처리를 진행해드리고 있습니다.
- 오류자료 : 파일이 정상적으로 열리지 않는 경우
- 중복자료 : 기간과 무관하게 같은 자료를 다운로드한 경우
- 유사자료 : 다운로드한 다른 자료와 내용과 구성이 동일한 경우(70% 이상)
- 불일치 자료 : 파일 제목 및 상세 내용과 다운로드 파일 내용이 다른 경우
- 공공자료 : 공익성을 목적으로 인터넷 공개되어 있는 자료와 동일한 경우
- 기타 자료 : 주요 환불정책에 해당되지 않으나 통상적으로 인정되는 경우